How to screen candidate sites for flood risk with GIS
A useful flood screening map answers three questions for each candidate parcel: where it overlaps a mapped flood zone, how much of the parcel overlaps, and which sources cover the site. The answer helps a project team decide where to spend time on field checks and site-specific studies.
Start with parcels, hazard polygons and coverage
Use a current parcel file from the local data authority and a stable parcel ID. Ask the hazard publisher for the study boundary as well as the flood polygons. A polygon layer alone rarely tells you where the map ends.
In Vancouver, the city’s designated floodplain dataset includes the coastal and Still Creek floodplains. Open the Vancouver example to see a mapped answer, then check the municipal source for the current definition and requirements.
Measure overlap and preserve the assumptions
- 1Confirm the parcel and flood layer use the same geospatial reference for overlay. For area measurements, use a suitable projected coordinate system or a documented geodesic area method.
- 2Dissolve overlapping hazard polygons within each scenario before calculating a combined area. Otherwise overlapping categories can count the same land twice.
- 3Keep a row for every candidate. Calculate intersection area and divide it by the corresponding full parcel area. Track scenarios separately so someone can reproduce each result.
- 4Flag parcels with incomplete coverage and boundary-only contacts. Identify nearby access roads and utilities that may have their own exposure.
| Screening status | What to hand off |
|---|---|
| Mapped overlap | Hazard source, scenario, intersected area and share of parcel |
| No mapped overlap within study coverage | Coverage source, map date and distance to the nearest hazard boundary if relevant |
| Coverage incomplete or unknown | Missing layer or uncovered parcel area and the person who can verify it |
Send the shortlist with evidence
Share the map, the scored parcel table and the source list. Include a note on map scale, effective dates and the screening rules. For acquisition or design decisions, ask the authority or a qualified practitioner to confirm the current flood construction requirements and site conditions.
Frequently asked questions
Is a parcel safe if it has no mapped overlap?
No mapped overlap means the geometry did not intersect the selected hazard layer. Check the map’s coverage and scenarios and document any unmodeled sources of flooding.
How do I rank parcels with unknown coverage?
Flag them for verification and keep them out of the confirmed screening shortlist until you can resolve their coverage.
More guides on site selection and land
Supply your study area and review the data sources before shortlisting sites.
Start a flood screening question