NeuraCities
All posts
GISVacant landSite selectionParcels

How to find vacant, developable land with GIS: a step-by-step method

The NeuraCities Team 10 min read

"Where is the vacant land?" sounds like a question with one answer. In practice it is three questions: which parcels have nothing on them, which of those can actually be built on, and which of those suit what you want to build. A vacant parcel inside a floodway, or a strip of railroad right of way, is vacant and useless.

This guide walks through the method GIS analysts use to get from a county's full parcel file to a short, defensible list of developable sites, using real county layers as examples and finishing with a worked example from Nashville.

Step 1: decide what "vacant" means

Start with the county parcel layer (see where to find free GIS data for your city if you do not have it yet). There are three common ways to flag a parcel as vacant, and a good screen states which one it uses:

SignalHow to test itWhere it goes wrong
Land use codeFilter the assessor's land use or property use field for vacant codes or descriptionsCodes describe the tax class, which can lag what is on the ground
Improvement value of zeroBuilding or improvement value equals zero, or total value equals land valueSmall sheds, parking lots or recent construction may not match your idea of vacant
No building footprintNo building footprint intersects the parcel (city footprints or OpenStreetMap buildings)Footprint layers can be out of date or incomplete in new subdivisions

Counties that publish a vacant land layer

Some counties have already done this step, and their definitions are a useful model:

  • Mecklenburg County, NC: a vacant land layer on Charlotte's GIS server starts from all tax parcels, removes golf courses, airport property, park property, submerged land, utility and railroad rights of way and cemeteries, and keeps only parcels with no building permits or building footprints. A count query in October 2026 returned 27,742 parcels.
  • Cuyahoga County, OH: the county planning commission's residential vacant land inventory uses parcel geometry from the county fiscal parcel fabric "to identify suburban vacant residential lots and support evaluation of future residential development opportunities". It held 15,001 parcels in October 2026, each with municipal zoning, permit fields and a field recording why it was kept: 14,364 are vacant in the parcel fabric, and the rest were kept on the strength of a permit record or a county land bank (CCLRC) listing.
Check two definitions against each other
The definitions really do disagree. In the Mecklenburg layer, which is built on the absence of permits and footprints, the assessor's own vacant-or-improved field reads IMP for 19,597 of the 27,742 parcels and VAC for 7,811 (our query of the live service, October 2026). Neither is wrong; they measure different things. Pick one, and say which.

Step 2: remove land that cannot be built on

Next, take out land where building is prohibited, impractical or not the owner's call. Each constraint is an overlay against the vacant parcels:

ConstraintTypical dataNotes
FloodplainFEMA National Flood Hazard LayerThe 100-year floodplain is the Special Flood Hazard Area: zones A, AE, AH, AO, V, VE and their variants
WetlandsNational Wetlands Inventory or state wetland mapsScreening only: NWI uses a biological, not regulatory, definition
Steep slopesSlope from a USGS 3DEP elevation modelUse the slope limit in your local code, and measure the share of each parcel above it
Parks and open spaceCity parks layer, OpenStreetMap parksAlso conservation easements where published
Rights of way and railroadsParcel type or owner fields, OpenStreetMap railOften long thin parcels that pass an area filter
Cemeteries, golf courses, airportsLand use codes, OpenStreetMapThe exclusions Mecklenburg County applies
WaterParcel layer, hydrographyMecklenburg's exclusions include submerged land

Drop the parcel, or erase the constrained part?

There are two ways to apply a constraint. Drop any parcel that touches the floodplain, which is conservative and simple. Or erase the floodplain from each parcel and keep the remaining net area, which keeps large parcels with a wet corner. If you erase, apply your minimum size test to the net area, not the original acreage.

Step 3: check zoning fit and minimum size

Join the city's zoning districts to the remaining parcels and keep those whose district allows the use you have in mind. Two practical details matter here:

  • Codes vary by city. Zoning layers carry district codes (RS20, IR, AR2A) that mean nothing outside that city. Group them into general categories (residential, commercial, industrial, mixed use) before filtering. Cuyahoga's inventory does this with a generalized zone field next to each municipality's own code.
  • Parcels cross district lines. A large parcel can touch two or three zoning districts, and a plain spatial join returns one row per district. Assign each parcel the district covering most of its area, or deduplicate, so each parcel is counted once.

Then apply a minimum size. Measure area yourself in a projected coordinate system rather than trusting an acreage field alone, and use net area if you erased constraints in Step 2. Shape matters too: a long, narrow parcel can pass an acreage test and still be unbuildable, so a minimum width or a compactness check is worth adding for small sites.

Step 4: look at ownership

Owner fields on the parcel layer turn a land screen into an acquisition list:

  • Public land: filter owner names for the city, county, state, school district, housing authority or transit agency. For affordable housing, publicly owned vacant land is often the first list people ask for.
  • Land banks: where a county land bank publishes its inventory, join it. Cuyahoga's vacant land layer already flags parcels listed by the county land bank.
  • Assemblage: adjacent vacant parcels with the same owner can be dissolved into one site, which can turn several small lots into one that passes your size test.
  • Recent sales: sale date and price fields, where present, show which parcels have just changed hands.
Owner names are messy
Owner names are typed by hand and inconsistent ("CITY OF X" in one record, "X CITY OF" in the next). Search on a few variants, and check the results before treating the list as complete.

Step 5: check access to roads, transit and utilities

A developable parcel needs a way in and services to connect to. The usual layers:

  • Roads and highways from OpenStreetMap or the state DOT, measured as distance to a highway or to the nearest road frontage.
  • Transit stops from the agency's GTFS feed or the city portal, measured as straight-line distance or, better, a walking network service area.
  • Water and sewer from the utility, where it publishes service area or main lines. This is the layer most often missing from public data, so treat it as a gap to fill with the utility rather than a reason to skip the criterion.
  • Power for industrial sites: substations and transmission lines.

Step 6: rank what is left

After Steps 1 to 5 you have a set of parcels that pass every hard constraint. Ranking them is a separate step with separate logic: normalise each soft criterion (distance to transit, net acreage, land value, distance to a highway), weight them, and combine them into one score.

HARD CONSTRAINTS FILTEREvery parcel in the study areacounty or city parcel layerWithin 1,500 m of a substationbuffer + intersectAnd within 500 m of fiberbuffer + intersectOutside the 100-year floodplain, 10+ acresoverlay + area filterSOFT CRITERIA RANKRanked shortlistweighted overlay of zoning,highway distance and land value
Scroll sideways to see the whole diagram.
Hard constraints (vacant, outside the floodplain, the right zoning, big enough) remove parcels. Soft criteria only reorder what is left.

Keep the weights written down next to the result, so anyone reviewing the list can see why parcel 3 outranks parcel 4. For the full method, see site suitability analysis with a weighted overlay.

A worked example: seven dry parcels in Nashville

Here is the method applied to a real screen in NeuraCities. The question: in Nashville and Davidson County, which parcels are vacant, over ten acres, within half a mile of an interstate and outside the FEMA 100-year floodplain?

286,920
parcels in Davidson County
maps.nashville.gov
19,174
flood hazard polygons
FEMA 100-year floodplain
7
parcels qualify
vacant, 10+ acres, near an interstate, dry
  1. 1Vacant: keep parcels whose land use description contains VACANT and whose acreage is over 10.
  2. 2Access: buffer OpenStreetMap interstates by half a mile and keep the parcels inside the buffer.
  3. 3Constraint: remove anything in the 100-year floodplain.
  4. 4Zoning: join the 5,992 zoning districts and count each parcel once, even where it straddles two districts.
Nashville: vacant, dry parcels near an interstate
Live map from a real NeuraCities run. Drag to pan, use two fingers or Ctrl + scroll to zoom.
Live
The real run: parcels, flood hazard areas and zoning from Nashville's open data, interstates from OpenStreetMap. The seven qualifying parcels are pinned. Toggle layers in the legend.
Land useAcresZoningArea
Vacant rural land41.5AR2AJoelton
Vacant industrial land28.4IRGoodlettsville
Vacant rural land21.3AR2AJoelton
Vacant residential land18.1RS20Goodlettsville
Vacant rural land15.8AR2AWhites Creek
Vacant rural land15.7AR2ANashville
Vacant rural land11.3R10Goodlettsville

Seven parcels out of 286,920 is the point of a screen: a list short enough to look at one by one. Read the full story in Seven parcels in Nashville, if you want to stay dry.

Running the whole screen in NeuraCities

Each step above is a standard GIS operation (filter, buffer, overlay, spatial join, dissolve, weighted overlay), which is exactly what the NeuraCities GIS agent runs. You describe the screen in one message:

In Mecklenburg County, NC, find vacant parcels of at least 5 acres outside the FEMA 100-year floodplain, zoned for multifamily or mixed use, within 800 m of a light rail or bus stop. Flag the ones owned by a public agency, and rank the rest by distance to transit and acreage.
  • The checklist comes first, so you can see which vacancy definition and which flood zones it will use before anything runs.
  • The Data Agent finds the parcel, zoning, flood and transit layers, probes each one for coverage of the county, and attaches its source.
  • The GIS agent runs the filters, overlays and joins with deterministic code, and the weighted overlay with the weights you state.
  • You get a map, a ranked table you can export to Excel, and the candidate layer as a Shapefile or CSV.

If you have a better parcel file or a utility's service area, upload it and it takes priority. Save the prompt as a workflow with {{county}} and {{min_acres}} as variables to run the same screen in the next county.

What a GIS screen does not tell you

A screen narrows a county to a handful of parcels worth a closer look. It does not replace due diligence on the finalists:

  • Title and easements: parcel maps are not the legal record of a boundary or of what is recorded against it.
  • Wetland delineation: a screening layer does not establish jurisdictional wetlands; for work that could affect wetlands, the US Fish and Wildlife Service points to the local US Army Corps of Engineers regulatory office.
  • Site conditions: soils, contamination, access permits and utility capacity need site-specific checks.
  • Data currency: check the update date of the parcel and zoning layers. A rezoning or a new subdivision since the last refresh changes the answer.

Frequently asked questions

How do I find vacant land for development?

Start with your county's parcel layer and flag vacant parcels by land use code, a building value of zero or the absence of a building footprint. Then remove floodplain, wetlands, steep slopes, parks, rights of way and cemeteries, keep parcels whose zoning allows your use and that meet a minimum size, and rank what is left by access and other criteria.

How do I find vacant lots in my city?

Check whether your county publishes a vacant land layer (Mecklenburg County, NC and Cuyahoga County, OH both do). If not, download the county parcels and filter for vacant land use codes or parcels with no building value. Search "[county] parcels GIS" or "[county] vacant land GIS" to find the data.

What is a developable land analysis in GIS?

A screen that starts with all parcels, keeps the vacant or underused ones, removes land that cannot be built on (floodplain, wetlands, steep slopes, protected and public uses), tests zoning, size, ownership and access, and ranks the remaining sites. Each step is a standard GIS overlay, join or filter.

How do I tell if a parcel is vacant in GIS?

Use the assessor's land use or vacant flag, check whether the building or improvement value is zero, or test whether any building footprint intersects the parcel. Combining two of these is more reliable than one, because they often disagree.

Should I remove the whole parcel if part of it is in the floodplain?

It depends on the purpose. Dropping any parcel that touches the floodplain is simple and conservative. Erasing the floodplain and keeping the remaining net area keeps large parcels with a wet corner; if you do that, apply your minimum size test to the net area.

Can AI find developable land?

Yes, if the AI plans the screen and a GIS engine runs it. In NeuraCities you describe the criteria in plain English, and the agents find the parcel, zoning, flood and transit data, run the overlays and return a mapped, ranked list with the source of every layer.

More guides on site selection and land

Describe your criteria and get a ranked, mapped list of developable parcels with every source attached.

Run a vacant land screen

Have a question about your own data?

Talk to us, or read the common questions.